Ulefone Armor 3WT
The Atom XL's USB radio bridge with an older DMR module, driven through the phone's radio daemon; written from a report, not yet tested.
| Feature | Result | Notes |
|---|---|---|
| FM receive | Untested | |
| FM transmit | Untested | Only in the guided Transmit test session until the profile is tested |
| DMR receive | Untested | No caller ID: the module's call-info answer is not decoded yet |
| DMR transmit | Untested | Only in the guided Transmit test session until the profile is tested |
Untested profile
This profile comes from an owner's device report, the phone's intercom app and its radio daemon. It has not run on the phone yet, so SignalDeck does not take over the radio by itself, and it transmits only in the guided Transmit test session (Device, Device report). Owners can help with Device, Run all checks, then that session.
Needs the radio daemon
SignalDeck talks to the phone's radio daemon (extmodule), as the intercom app does; on a custom ROM the daemon comes from the owner's own Magisk module and must be running. SignalDeck recognises the phone by its model or its board, and only when the daemon is installed.
No time slot
The module's digital channel has no time slot setting, so SignalDeck does not offer TS1 or TS2 on this phone: the module chooses. Simplex DMR with other radios is the safe use; repeater channels may not work.
No signal meter
The module has no known signal-strength command, so the S-meter, band scope and fox hunt readings are off on this phone. Run all checks asks the module once to find out.
Bands from the intercom app
The bands are what the phone's intercom app accepts, 100 to 470 MHz without the 174 to 400 MHz gap. The module's own range is not measured; Run all checks records its answer at the edges, receive only.
Side key
The side key reaches only the kernel, not apps, on the custom ROM in the report. SignalDeck reads it with root as its default custom PTT key; until the profile is tested it keys nothing outside the Transmit test session.
- Notes
- SignalDeck does not load module firmware on this phone: no module image exists (two stock ROMs checked) and the phone is not certified for loading.
Install SignalDeck and open Device → Device report → Run all checks, then send the zip it makes.
That is how phones move up a level. Get your phone certified · Device support guide